CERAMIC CAR COATING

Ceramic Coat Pro is a hard wearing, ceramic clear coat for superior resistance to scratching (9H) and protection from chemical etching due to environmental impacts.

The Ceramic Coat pre-polymer cross links, and forms a continuous protective film on the painted surface it is applied to, similar to a single component isocyanate that forms a clear coat finish.

Ceramic Coat has better chemical resistance, scratch & mar resistance, and release properties than any automotive paint coating in use. It provides permanent protection for all modern factory paints and can also be used to protect metal and hard plastic surfaces.

The first significant difference is the chemistry. The manufacturer of Ceramic Coat was a formulator of urethane clear coats for OEM automotive finishes. Dr Ghodoussi explains in technical terms:

"Ceramic Coat is a pre-polymer that cross links and forms a continuous film on the surfaces it is applied to, similar to a single component isocyanate that forms a clear coat finish. Ceramic Coat also reacts with the substrate that it is applied to so it will not delaminate"

"As far as the durability, it is similar to urethane clear coats. It will not wash away or break down, however, you can polish it over time ! The hardness starts at 6-7 but will increase over time to 9H as it is exposed to heat. Ceramic Coat has better chemical resistance, scratch & mar resistance, and release properties than any automotive coating in use."

Ceramic Coat is not a wax, nano or polymer sealant that will degrade over short periods of time. Or a paint protection product that requires a special "soft wash" or pH neutral shampoo to remain on the surface for any extended period of time. It is a permanent, clear-coat finish very similar to your factory clear coat, only harder, and with higher resistance to chemical etching.

The second significant difference is the thickness of the coating. A single layer of Ceramic Coat measures approximately 2 microns in thickness. Or 100 times thicker than your typical wax or sealant measuring in at 0.02 microns.

What this means to your vehicle is that any damage inflicted on the surface is absorbed by the Optimum Coating. This is particularly significant in relation to scratches and swirls in the paintwork that inevitably build up over time. Not only will the Ceramic Coat Pro resist damage far better than factory finishes, but the coating itself can eventually be removed and reapplied. Preserving your factory coating, and restoring the vehicle to "better than new" condition.

Ceramic Coat is not a paint protection wax or sealant that will wash away, or break down over time. Ceramic Coat Pro bonds permanently with the factory coating, protecting the surface indefinitely and will not delaminate.

A single layer of Ceramic Coating measures approximately 2 microns in thickness. When compared to other paint protection products, Ceramic Coat Pro is more than 100 times thicker, with tests showing a wax coating measuring less than 0.02 microns.

This allows Ceramic Coat to effectively absorb damage that would otherwise affect the factory paint layers. Swirl marks and light scratches are not only decreased by the harder Ceramic Coating, the factory paint is protected and preserved.

Ceramic Coat is completely resistant to acidic environmental substances such as bird droppings. Unlike your factory clear coating that can be permanently damaged, Ceramic Coat will not etch or dissolve when in contact with these substances, and a clean, glossy clear coating is maintained.

A Superior Clear Coat Film
Ceramic Coat will provide the owner with a superior clear coat film and the most advanced paint protection product in the marketplace, that is resistant to chemical etching, and harder than factory clear coatings to reduce swirls and scratches

A Permanent Hydrophobic Surface
Ceramic Coat will provide the owner with a permanent hydrophobic surface that is easier to clean, and stays cleaner for longer!

Improved Resale Value
By maintaining a quality finish using the Ceramic Coat, you'll also maintain a solid resale value when it comes time to upgrade to a new vehicle.

Ceramic Coat by bonding to your factory clear coating and becoming a permanent part of your vehicles paint system. Just like the clear coat bonds to the base coat, Ceramic Coat bonds chemically to the clear coat.

Initially, we will assess the paint work for defects and contamination. All surface contamination and any necessary defects are removed. Once this stage is complete, the paintwork is prepped and cleaned using an alcohol based cleaner and ready for coating.

The Ceramic Coating is mostly self leveling. Any high spots are manually leveled by our technician to produce an even coat. Once complete, the surface is touch dry within 30 minutes.

The Ceramic Coat continues to cross-link and harden. Within 12 hours it is resistant to liquids such as water and can be driven as normal by the client. Ceramic Coat will then continue to harden over the next 30 days as it is exposed to heat.

• Painted surfaces
• Headlights and taillights
• Wheels
• Hard plastic
• Chrome and aluminum

• Dry to the touch after 30 minutes
• Can be exposed to water after one hour
• Hand wash after one week (with proper shampoo)
• Chemical resistant after one to two weeks
• Full hardness after approximately 30- 60 days (temperature dependent)

Yes you can! Unlike other products that will void your warranty, periodic polishing of Ceramic Coat will actually improve it by removing any embedded contamination. Use only non abrasive polishes. If you are unsure about your polish, contact us before using it.